For commercial and/or pubic properties, the HSE (Health and Saftey Executive) recommends shower heads and hoses are cleaned and descaled thoroughly at least every 3 months
Showerhead Plus Gel is a one-stop solution to descale and sanitize shower heads, plumbing fittings, and sanitary ware that cannot otherwise be removed for cleaning. Showerhead Plus Gel has been developed for use on vertical surfaces and fixed fittings that cannot be dismantled and immersed for treatment. the product is applied by using a brush or other suitable applicator.
- Physically clean the head with a soft brush to remove loose deposits or soap scum.
- Apply Showerhead Plus Gel over the surface to be descaled and cleaned and allow to soak for five minutes
- Rinse thoroughly with clean water
- Inspect the surface of the shower head or fitting and if any scale is present then repeat step 2
- When the Shower head or fitting is clean and scale free apply a further coating of Showerhead Plus Gel over the surface of the shower head or fitting
- Allow a minimum of one-minute contact time for the disinfection process
- Rinse with copious amounts of clean water
- Examine fittings to confirm cleanliness
To remove heavy deposits:
Use Showerhead Plus liquid neat – caution should be used when using neat on chrome fittings. Please test in a small area first. For routine and regular cleaning:
Immerse in a solution of 1-part Showerhead Plus liquid to 3 parts water. For routine and regular cleaning of your shower head and hose:
- Physically clean the head with a soft brush to remove loose deposits or soap scum
- Use a sturdy plastic bucket. Immerse the shower heads and hoses in a solution of 1-part Showerhead Plus liquid to 3 parts water – enough to cover the shower heads and hoses.
- Leave to soak for 2-15 minutes.
- Any remaining loose scale can be removed by gentle rubbing.
- Rinse thoroughly with clean water.
- Examine fittings to confirm cleanliness
