Microbiological Dipslide Incubators for Water Testing
We offer a wide variety of dipslide incubators for water testing:
- Choose from five dipslide incubators for water testing
- Safe and low voltage
- Made in the UK to the highest standard
- Guaranteed fast delivery
- Upgrades and accessories available
See Our Range of Incubators Below
NEXT-DAY DELIVERY
Available On Most Products
PRICE MATCH GUARANTEE
On Like-For-Like Items *
FULL RANGE
Water Hygiene Control Supplies
INSTANT SUPPORT
Chat, Telephone, Email
Dipslide Incubators For Water Testing
The dipslide test consists of a sterile reactive agar on a plastic paddle, which is dipped into the sample liquid or pressed onto the surface. After this, the dipslide is placed in a microbiological dipslide incubator for water testing or surface testing. The dipslide will stay here for a fixed period of time, at a fixed temperature, as this allows the bacteria to grow.
The Health and Safety Executive‘s (HSE) Approved Code of Practice (ACoP L8) recommends using dipslides to monitor the levels of aerobic bacteria. Although common in water systems, this can be completed in different environments. Our dipslides can be used for water treatment for the control of legionella, or on surfaces. In addition, ACoP L8 recommends that cooling towers should be tested weekly.
GNAT MX2 Dipslide Incubator
The smallest incubator kit in our range.
The GNAT MX2 dipslide incubator for water testing is perfect for all low-volume dipslide applications. Plug in and go!
The GNAT MX2 dipslide incubator features upgraded functionality to make your small scale incubation solution even simpler. Additionally, the MX2 is our bespoke brand used for a small scale incubation. This includes one to two tests in any 48 hour period.
The addition of low voltage heater control technology means the MX2 can run via an optional in-car cigarette socket. As a result, this gives you unparalleled versatility in situations where mobile/field testing may be required.
The GNAT MX2 is the market leader in easy, low-cost compliance solutions for industry standard TVC testing.
The GNAT dipslide incubator for water testing is pre-set. This means all you have to do is allow 15-20 minutes to stabilize and then incubate.
Key Features of the Dipslide Incubator
- Incubates up to 2 dipslides (low volume incubator)
- Constant incubator temperature – pre-set at 30 degreess
- Reliable indication of sanitary – fully automated (no moving parts thermostat etc.)
- Automatic heat indicator light illuminates yellow, when heat is being applied
- Case size – 15 x 8 x 9 cm
- Light Weight – 1.1kg
Please note: The Gnat MX2 Incubator does not come with a calibration certificate. It is supplied with a validation on the instructions confirming it has been pre-set to 30 degrees Celsius during manufacture. An individual certificate assigned to the actual serial number of a unit can be provided at an additional cost. Please contact us prior to ordering if you require this.
Alternatively, if you have a calibrated thermometer on your site, you can carry out the calibration procedure yourself. Please see the attached link.
Orion MX8 Dipslide Incubator
The stylish and robust design of the Orion MX8 features a tough 4mm ABS injection moulded body. It also includes a strong HIP lid. Therefore, this dipslide incubator is ideal for demanding industrial applications on site.
An optional 12v cigar lighter cable is available allowing the Orion MX8 to be used in a vehicle if required.
The unit holds up to 8 dip slides safely in the special wells. In addition, a clear lid is supplied to ensure the incubation is even to reduce sanitary risk.
Key Features
- Holds up to 8 dipslides
- Includes mains power pack and universal plug option
- Ready to use and measure total coliform
- Temperature controlled at 30 degrees
- Light weight 1.1kg
- External case size- (footprint) 22 x 13 x 15(H) cm
Discovery MX10 Dipslide Incubator
The Discovery MX10 dipslide incubator for water testing is easily capable of holding several 100mm Petri-dishes, as well as 10 dipslides. Applied applications both on-site and in a vehicle.
The efficient design helps minimise drain on the vehicle battery. Furthermore, the robust ABS case is ideal for a life out in the field.
Key Features of the Dipslide Incubator
- Holds up to 10 dipslides
- Temperature range 5 to 45 degrees
- Light weight 1.2 kg
- Safe, reliable and accurate
- Chamber Size (useable) – 11 x 13 x 70 (H) cm
- External case size- (footprint) 27 x 21 x 10(H) cm
- Total Weight – Inc cables and adaptor 1.2 Kg
Challenger MX25 ‘MINI’ Incubator
The newly upgraded Challenger MX25 mini dipslide incubator is the first choice for quick and easy analysis of dipslides, Reagent Tests or small scale off-field laboratory applications.
The tough Polycarbonate clear lid and HIPS base means the incubator for water testing is robust enough for the most hostile working environments.
Key Features
- Hold up to 25 dipslides / 30 x 95mm Petri dishes
- Temperature range 5 to 45 Degrees
- Tough and robust
- Chamber Size (useable) – 18 x 18 x 15 cm (Height) cap 5.2 litres
- External case size- (footprint) 26 x 32 x 27 cm
- Weight 2.1 kg
Ranger MX45 ‘MINI’ Incubator
The Ranger MX45 sets leading standards for economic portable incubation of dipslides and other rapid water quality tests.
Use this dipslide incubator for water testing in the field, site or laboratory facilities. Additionally, it is supplied ready to use on mains (worldwide plug and voltages) or 12 volts (vehicle cigar lighter).
The MX solid state temperature control technology and heat reservoir chassis guarantee superb heat distribution, without any fans or moving parts.
Key Features of the Dipslide Incubator
- Holds up to 45 dipslides or 3 stacks of 100mm Petri-dishes
- Temperature range +5 to 45 Degrees
- Ready to use
- New High-Impact Case now features internal Storage for cables & power pack
- Chamber Size (useable) – 30 x 15 x 13 (H) cm
- External case size- (footprint) 42 x 22 x 23(H) cm
- Total Weight – Inc cables & adaptor 3.5 Kg
* Please Note: Our price match guarantee excludes dipslide incubators for water testing (including drinking water).
If you have any further questions or requirements, please do not hesitate to contact us on: 01909 66 67 08 or onlinesales@hydro-x.co.uk