Fire Damper Remedial Work

Ensure your Fire Dampers are Compliant

The requirement to remedy any defects found with fire dampers is as important as the testing and maintenance itself. A defect with the surrounding fire break or a mechanical fault with the fire amper unit itself will result in a decreased efficiency to slow the spread of fire or render the fire break completely ineffective.

With the enactment of the Regulatory Reform (Fire Safety) Order 2005, it is now the employer’s responsibility to maintain their fire safety systems.

BS 9999 Annex W.1 Inspection and Maintenance (Note 2), also states that:

‘Arrangements should be made for all fire dampers to be tested by a competent person on completion of the installation and at least annually, and to be repaired or replaced immediately if found to be faulty.’

These publications are supported by the existing BESA publications with DW145 – Installation and Maintenance of Fire and Smoke Dampers currently under review

At Hydro-X Fire, not only can we complete the fire damper inspections, we can also assist with remedial works.

We can help with remedial actions such as:

Request a Callback





    Mechanical Remedials: From replacement of a fusible link to replacement of the entire unit including securing and sealing the unit within the fire break.

    Fire Compartmentalisation Failure: These come in many forms from small perforation to fire damper units located completely outside of the fire break.

    Building Defect: These are most commonly found when reactive changes have been made to the fire compartmentalisation plan Hydro-X Air can analyse the as built plan and consult on how to best seal a defective fire compartment

    Insufficient Access: DW145 – Installation and Maintenance of Fire and Smoke Dampers states that the installation of a DW144 access door is a requirement for testing purposes. TR19 – Internal Cleanliness of Ventilation Systems states that a DW144 access door is required either side of the fire damper unit for cleaning purposes.

    Hydro-X Fire will analyse the above fire damper defects and suggest the most efficient solution possible. For further fire damper remedial information or to get a quote please use the contact sheet below.

    > Enquire about our Fire Damper Remedial work services
    > View our other Fire services

    fire damper testing

    Sample Fire Damper Remedial Report

    DOWNLOAD HERE

    VH001 FIRE AND SMOKE DAMPER MAINTENANCE BULLETIN

    DOWNLOAD HERE

    CONTACT US TODAY:

    PHONE – 01909565133 EMAIL – info@hydro-x.co.uk

    At Hydro-X Fire, not only can we install sufficient access into your ductwork systems, but we can also assist with the following fire damper services:

    Fire damper installation & replacement 

    These come in many forms from small perforation to fire damper units located completely outside of the fire break.

    Fusible Link Sourcing & Replacement

    These come in many forms and sizes and are a vital piece in the functionality of the fire damper and efficiency of the HVAC system

    Fire Stopping

    Your fire stopping needs to be inspected and any defects rectified to ensure the effectiveness of the fire plan and the safety of the occupants using the building

    DW144 Access Panel Installation

    BS 9999 Annex W.1 Inspection and Maintenance (Note 2) states that: “The provision of access panels facilitates such cleansing, other maintenance, and also fire-fighting.”

    Hydro-X Fire will analyse the above fire damper defects and suggest the most efficient solution possible. For further fire damper remedial information or to get a quote please use the contact sheet below.

    > Enquire about our access door installation services

    > View our other Fire services

    SHARE THIS:

    X
    Important Legionella Control During COVID-19